Subscriber Information Section - Cisco SPA2102-AN - Single Port Router Administration Manual

ATA Voice Field Reference
Trunk Group page (SPA8000)
Cisco Small Business ATA Administration Guide
Voice tab > Trunk Group page > (SPA8000) >

Subscriber Information section

Display Name
User ID
Password
Use Auth ID
Auth ID
Call Capacity
Display name for caller ID.
Extension number for this line.
Password for this line.
To use the authentication ID and password for SIP
authentication, select yes. Otherwise, select no to use the
user ID and password.
The default is no.
Authentication ID for SIP authentication.
Maximum number of calls allowed on this trunk group.
Choices: 1-15 or unlimited (16 calls). Default is unlimited.
Both incoming call and outgoing call are counted towards
this limit. The call capacity has the following impact on call
handling:
•
Inbound calls: When the limit is reached, the Trunk SUA
replies 486 to the caller.
•
Outbound calls: When the limit is reached, the Line SUA plays
a fast busy tone to the caller. Note that a trunk line can make
an outgoing call only through its own trunk. If that trunk
reaches full capacity, it will not attempt to failover to use other
trunks
B
195