Lan Networking Settings Section; Static Dhcp Lease Settings Section; Application Page - Cisco SPA2102-AN - Single Port Router Administration Manual

ATA Routing Field Reference

Application page

Application page
Cisco Small Business ATA Administration Guide
Router tab > LAN Setup page >

LAN Networking Settings section

Use these network settings when using NAT.
LAN IP Address
LAN Subnet Mask
Enable DHCP Server
DHCP Lease Time
DHCP Client Starting IP
Address
Number of Client IP
Addresses
Router tab > LAN Setup page >

Static DHCP Lease Settings section

Use these settings when using a static IP address.
Enable
Host Mac Address
Host IP Address
You can use the Application page to view the port forward settings and to update
the DMZ settings, multicast passthru setting, and system reserved ports range.
This page includes the following sections:
•
"Port Forwarding Settings section," on page 113
•
"DMZ Settings section," on page 113
•
"Miscellaneous Settings section," on page 114
IP address of the ATA device on the LAN side.
IP address for subnet mask.
The status of the DHCP server where Yes is enabled
and No is disabled.
Provided by the DHCP Server. IP renewal process
begins when the time expires.
Initial IP address the DHCP Server provides for PCs
attached to the LAN port.
Number IP addresses available for the DHCP Server to
provide.
Options are Yes or No. Default is No.
The device's MAC address
The device's IP address
A
112