User Page - Cisco SPA2102-AN - Single Port Router Administration Manual

ATA Voice Field Reference

User page

User page
NOTE
Cisco Small Business ATA Administration Guide
Depending on the model of ATA device, there may be one or more User pages.
You can use this page to configure the user settings.
On the SPA8000, these settings can be configured on the Line pages (Line 1, Line
2, and so on). On the SPA8800, theses settings can be configured on the Phone
pages (Phone 1, Phone 2, and so on).
This page includes the following sections:
•
"Call Forward Settings section" section on page 222
•
"Selective Call Forward Settings section" section on page 223
•
"Speed Dial Settings section" section on page 223
•
"Supplementary Service Settings section" section on page 224
•
"Distinctive Ring Settings section" section on page 225
•
"Ring Settings section" section on page 226
When a call is made from Line 1 or Line 2, the ATA device shall use the user and line
settings for that line; there is no user login support. Per user parameter tags must
be appended with [1] or [2] (corresponding to line 1 or 2) in the configuration profile.
It is omitted below for readability.
B
221