Digit Sequence Examples - Cisco SPA2102-AN - Single Port Router Administration Manual

Configuring Voice Services
Configuring Dial Plans
Cisco Small Business ATA Administration Guide

Digit Sequence Examples

The following examples show digit sequences that you can enter in a dial plan.
In a complete dial plan entry, sequences are separated by a pipe character (| ) , and
the entire set of sequences is enclosed within parentheses.
EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8,
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! |
9, 011xxxxxx. | 0 | [49]11 )
•
Extensions on your system
EXAMPLE: (
[1-8]xx
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx !
| 9, 011xxxxxx. | 0 | [49]11 )
Allows a user dial any three-digit number that starts with the digits 1
[1-8]xx
through 8. If your system uses four-digit extensions, you would instead enter
the following string:
•
Local dialing with seven-digit number
EXAMPLE: ( [1-8]xx |
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx !
| 9, 011xxxxxx. | 0 | [49]111)
After a user presses 9, an external dial tone sounds. The user can
9, xxxxxxx
enter any seven-digit number, as in a local call.
•
Local dialing with 3-digit area code and a 7-digit local number
EXAMPLE: ( [1-8]xx | 9, xxxxxxx |
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx !
| 9, 011xxxxxx. | 0 | [49]11 )
9, <:1>[2-9]xxxxxxxxx
After a user presses 9, an external dial tone sounds. The user must enter a 10-
digit number that begins with a digit 2 through 9. The system automatically
inserts the 1 prefix before transmitting the number to the carrier.
•
Local dialing with an automatically inserted 3-digit area code
EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx |
<:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9,
011xxxxxx. | 0 | [49]11 )
| 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8,
[1-8]xxx
| 9, <:1>[2-9]xxxxxxxxx | 8,
9, xxxxxxx
This example is useful where a local area code is required.
9, <:1>[2-9]xxxxxxxxx | 8,
4
8,
64