Wan Status Page; Internet Connection Settings Section - Cisco SPA2102-AN - Single Port Router Administration Manual

ATA Routing Field Reference

WAN Status page

WAN Status page
Cisco Small Business ATA Administration Guide
Current Time
Broadcast Pkts Sent
Broadcast Bytes Sent
Broadcast Pkts Recv
Broadcast Bytes Recv
Broadcast Pkts
Dropped
Broadcast Bytes
Dropped
You can use the WAN Status page to enter the WAN connection settings. This
page includes the following sections:
•
"Internet Connection Settings section," on page 107
•
"Static IP Settings section," on page 108
•
"PPPoE Settings section," on page 108
•
"Optional Settings section," on page 109
•
"MAC Clone Settings section," on page 110
•
"Remote Management section," on page 110
•
"QOS Settings section," on page 110
•
"VLAN Settings section," on page 111
Router tab > WAN Setup page >

Internet Connection Settings section

Connection Type
Current date and time of the system; for example, 10/3/
2003 16:43:00.
Total number of broadcast packets sent.
Total number of broadcast packets received.
Total number of broadcast bytes sent.
Total number of broadcast bytes received and
processed.
Total number of broadcast packets received but not
processed.
Total number of broadcast bytes received but not
processed.
The type of WAN connection. Options are: DHCP, Static
IP, PPPoE, PPPoE / DHCP (tries PPPoE then DHCP), or
DHCP/ PPPoE (tries DHCP then PPPoE).
A
107