Pstn User Page (Spa3102); Pstn-To-Voip Selective Call Forward Settings Section - Cisco SPA2102-AN - Single Port Router Administration Manual

ATA Voice Field Reference

PSTN User page (SPA3102)

PSTN User page (SPA3102)
Cisco Small Business ATA Administration Guide
Ring On No New
VM
On the SPA3102, you can use the Voice tab > PSTN User page to configure the
PSTN user settings. This page includes the following sections:
•
"PSTN-To-VoIP Selective Call Forward Settings section" section on
page 227
•
"PSTN-To-VoIP Speed Dial Settings section" section on page 228
•
"PSTN Ring Thru Line 1 Distinctive Ring Settings section" section on
page 228
•
"PSTN Ring Thru Line 1 Ring Settings section" section on page 228
Voice tab > PSTN User page (SPA3102) >

PSTN-To-VoIP Selective Call Forward Settings section

Cfwd Sel 1 -8 Caller
Cfwd Sel 1 -8 Dest
If enabled, the ATA device will play a ring splash when the
VM server sends SIP NOTIFY message to the ATA device
indicating that there are no more unread voice mails. Some
equipment requires a short ring to precede the FSK signal
to turn off VMWI lamp.
The default is no.
Eight PSTN Caller Number Patterns to be blocked for VoIP
gateway services or forwarded to a certain VoIP number. If
the caller is blocked, the SPA will not auto-answers the call.
Eight VoIP destinations to forward a PSTN caller matching
Cfwd Sel x Caller parameter.
the
PSTN caller is blocked for VoIP service.
B
If this entry is blank, the
227