TYAN TEMPEST II Manual page 64

83 Command byte written, Global data init. done. About to
check for lock key.
84 Lock key ckeck over. About to check for memory size mis
match with CMOS.
85 Memory size check done. About to display soft error and
check for password or bypass setup.
86 Password checked. About to do programming before setup.
87 Programming before setup complete. Going to uncompresse
setup code and execute CMOS setup.
88 Return from CMOS setup program and screen is cleared.
About to do programming after setup.
89 Programming after setup complete. Going to display power
on screen message.
8B First screen message display. <WAIT..> message displayed.
About to do Main and Video BIOS ahado/yte and init.
circular buffer.
8C Main and Video BIOS shadow successful. Setup option
programminig after CMOS setup about to start.
8D Setup option are programming, mouse check and init. to be
done next.
8E Mouse check and init. complete. Going for HD contoller reset
8F HD controller reset done. Floppy setup to be done next
91 Floppy setup complete. HD HD setup to be next
94 HD setup done. Going to set base and extended memory size
95 Memory size adjust due to mouse support, HD type 47 Init.
of different BUSes optional C800 to start.
96 Going to do any Init before C800 optional ROM control.
97 Any Init before C800 optional ROM control is over. Optional
ROM check and control will be done next.
98 Option ROM control is done. About to give control to do any
required processing after optional ROM return control.
99 Any Init. required after optional ROM test over. Going to
setup timer data area and printer base address.
S1462-001-01 64