TYAN TEMPEST II Manual page 30

Table of Contents

Advertisement

* Virus warning
This category flashes on screen. During and after the system boot up,
any attempt to write to the boot sector or the partition table of the hard
disk drive will halt the system and the following error message will
appear. In the mean time, you can run an anti-virus program to locate the
problem. Default value is Enabled.
Enabled Activate automatically when the system boots up causing a warning
message to appear when anything attemps to access the boot sector
or hard disk partition table.
Disable No warning message to appear when anything attemps to access the
boot sector or hard disk partition table.
* CPU Internal Cache/External Cache
These two categories speed up the memory access. However, it de
pends on the CPU/Chipset design. The default value is Enabled.
Enabled Enables
the
Disabled Disables
the
* Boot Sequence
This category determines which drive the computer searches first for the
disk operating system (i.e. DOS). Default value is A,C.
A,C
System will first search for floppy disk drive then hard disk drive.
C,A
System will first search for hard disk drive then floppy disk drive
* Swap Floppy Drive
The default value is disabled
E n a b l e d Floppy A & B will be swapped under DOS
D i s a b l e Floppy A & B will be normal definition.
S1462-001-01
cache
cache
30

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tempest ii s1462

Table of Contents