TYAN TEMPEST II Manual page 27

Table of Contents

Advertisement

* Drive C type/Drive D type
The category identifies the types of hard disks, C or D drive that have
been installed in the computer. There are 46 predefined types and a user
definable type. Type 1 through 46 are predefined. Type User is user-defin
able.
Press PgUp or PgDn to select a numbered hard disk type or type a number
and press <Enter>. Note that the specifications of your drive must match
with the drive table. The hard disk will not work properly if you enter the
improper information for this category. If your hard disk type is not listed,
you can Type User to define your own drive manually.
If you select Type User, related information is asked to be entered to the
following items. Enter the information directly from the keyboard and press
<Enter>. The hard disk information should be provided in the documenta-
tion from your hard disk vendor or the system manufacturer.
CYLS
number
of
HEADS
number of heads
PRECOMP
writen
precom
LANDZONE
landing
zone
SECTORS
number
of
If a hard disk has not been installed, select NONE and press <Enter>.
* Drive A type/Drive B type
This category identifies the types of floppy disk drives A or drive B,
that have been installed in the computer.
None
No floppy drive installed
360K, 5.25 in. 5-1/4 inch PC-type standard drive; 360 kilobyte capacity
1.2M,5.25
in.
5-1/4 inch AT-type high-density drive; 1.2 megabyte capacity
720K, 3.5 in.
3-1/2 inch double-sided drive; 720 kilobyte capacity
1.44M, 3.5 in. 3-1/2 inch double-sided drive; 1.44 megabyte capacity
2.88M, 3.5 in. 3-1/2 inch double-sided drive; 2.88 megabyte capacity
S1642-001-01
cylinders
sectors
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tempest ii s1462

Table of Contents