TYAN TEMPEST II Manual page 12

SIMM SIMM
BNK0 BNK1
32MB*2 (1MB*2)
32MB*2 (2MB*2)
32MB*2 (4MB*2)
32MB*2 (8MB*2)
32MB*2 (16MB*2) (16MB*2) (16MB*2)
32MB*2 (32MB*2) (32MB*2) (32MB*2)
32MB*2 (64MB*2) (64MB*2) (64MB*2)
64MB*2 (1MB*2)
64MB*2 (2MB*2)
64MB*2 (4MB*2)
64MB*2 (8MB*2)
64MB*2 (16MB*2) (16MB*2) (16MB*2) 128MB 160MB 192MB 224MB
64MB*2 (32MB*2) (32MB*2) (32MB*2) 128MB 192MB 256MB 320MB
64MB*2 (64MB*2) (64MB*2) (64MB*2) 128MB 256MB 384MB 512MB
Each bank may use either 1-sided or 2-sided SIMMs.
All SIMMs must be Fast Page Mode DRAM with speeds less
than or equal to 70ns.
SIMM modules installed must be in pairs.
SIMM modules in parentheses ( ) are optional.
Refer to Fig. 3.1 for DRAM installation location. Pin-1 of the SIMM
module must match the Pin-1 of SIMM socket.
Insert the DRAM SIMM module into the socket at a 45 degree angle. If
the SIMM module is inserted on the wrong side, it can not be completly
plugged into the socket. After insertion, press the SIMM module in a
vertical direction until both left and right metal holders latch.
S1462-001-01
SIMM SIMM SIZE
BNK2 BNK3 BK0
(1MB*2) (1MB*2) 64MB
(2MB*2) (2MB*2) 64MB
(4MB*2) (4MB*2) 64MB
(8MB*2) (8MB*2) 64MB
64MB
64MB
64MB
(1MB*2) (1MB*2) 128MB 130MB 132MB 134MB
(2MB*2) (2MB*2) 128MB 132MB 136MB 140MB
(4MB*2) (4MB*2) 128MB 136MB 144MB 152MB
(8MB*2) (8MB*2) 128MB 144MB 160MB 176MB
12
SIZE SIZE SIZE
BNK BNK BNK
0 0,1 0-2
66MB 68MB 70MB
68MB 72MB 76MB
72MB 80MB 88MB
80MB 96MB 112MB
96MB 128MB 160MB
128MB 192MB 256MB
192MB 320MB 448MB
0-3