Dual Pitch - Yamaha M7CL Owner's Manual

Effects Parameters
■ TREMOLO
Two input, two output tremolo effect
Parameter Range
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
WAVE Sine, Tri, Square
SYNC OFF/ON
*1
NOTE
LSH F 21.2 Hz–8.00 kHz
LSH G –12.0 to +12.0 dB
EQ F 100 Hz–8.00 kHz
EQ G –12.0 to +12.0 dB
EQ Q 10.0–0.10
HSH F 50.0 Hz–16.0 kHz
HSH G –12.0 to +12.0 dB
*1.
■ HQ. PITCH
One input, two output high-quality pitch shifter.
Parameter Range
PITCH –12 to +12 semitones Pitch shift
FINE –50 to +50 cents
DELAY 0.0–1000.0 ms
FB. GAIN –99 to +99%
MODE 1–10
SYNC OFF/ON
*1
NOTE
*1.
(Maximum value depends on the tempo setting)
256
M7CL Owner's Manual
.
Description
Modulation speed
Modulation depth
Modulation waveform
Tempo parameter sync on/off
Used in conjunction with TEMPO
to determine FREQ.
Low shelving filter frequency
Low shelving filter gain
EQ (peaking type) frequency
EQ (peaking type) gain
EQ (peaking type) bandwidth
High shelving filter frequency
High shelving filter gain
Description
Pitch shift fine
Delay time
Feedback gain (plus values for
normal-phase feedback, minus
values for reverse-phase feed-
back)
Pitch shift precision
Tempo parameter sync on/off
Used in conjunction with
TEMPO to determine DELAY

■ DUAL PITCH

Two input, two output pitch shifter.
Parameter Range
PITCH 1 –24 to +24 semitones Channel #1 pitch shift
FINE 1 –50 to +50 cents
LEVEL 1 –100 to +100%
PAN 1 L63 to R63
DELAY 1 0.0–1000.0 ms
FB. G 1 –99 to +99%
MODE 1–10
PITCH 2 –24 to +24 semitones Channel #2 pitch shift
FINE 2 –50 to +50 cents
LEVEL 2 –100 to +100%
PAN 2 L63 to R63
DELAY 2 0.0–1000.0 ms
FB. G 2 –99 to +99%
SYNC OFF/ON
*1
NOTE 1
*1
NOTE 2
*1.
(Maximum value depends on the tempo setting)
■ ROTARY
One input, two output rotary speaker simulator.
Parameter Range
ROTATE STOP, START Rotation stop, start
Rotation speed (see SLOW and
SPEED SLOW, FAST
FAST parameters)
SLOW 0.05–10.00 Hz SLOW rotation speed
FAST 0.05–10.00 Hz FAST rotation speed
DRIVE 0–100 Overdrive level
ACCEL 0–10 Acceleration at speed changes
LOW 0–100 Low-frequency filter
HIGH 0–100 High-frequency filter
■ RING MOD.
Two input, two output ring modulator.
Parameter Range
Modulation source: oscillator or
SOURCE OSC, SELF
input signal
OSC FREQ 0.0–5000.0 Hz Oscillator frequency
Oscillator frequency modulation
FM FREQ. 0.05–40.00 Hz
speed
Oscillator frequency modulation
FM DEPTH 0–100%
depth
SYNC OFF/ON Tempo parameter sync on/off
Used in conjunction with TEMPO
*1
FM NOTE
to determine FM FREQ
*1.
Description
Channel #1 pitch shift fine
Channel #1 level (plus values
for normal phase, minus values
for reverse phase)
Channel #1 pan
Channel #1 delay time
Channel #1 feedback gain (plus
values for normal-phase feed-
back, minus values for
reverse-phase feedback)
Pitch shift precision
Channel #2 pitch shift fine
Channel #2 level (plus values
for normal phase, minus values
for reverse phase)
Channel #2 pan
Channel #2 delay time
Channel #2 feedback gain (plus
values for normal-phase feed-
back, minus values for
reverse-phase feedback)
Tempo parameter sync on/off
Used in conjunction with
TEMPO to determine Channel
#1 delay
Used in conjunction with
TEMPO to determine Channel
#2 delay
Description
Description