Using The Oscillator - Yamaha M7CL Owner's Manual

Using the oscillator

Here's how to send a sine wave or pink noise from the internal oscillator to a desired bus.
1
In the function access area, press the MON-
ITOR button to access the MONITOR
screen.
In the MONITOR screen, the OSCILLATOR field lets
you check the current oscillator settings, and turn the
oscillator on/off.
If you want to view or edit the oscillator settings in
greater detail, use the OSCILLATOR popup window
described in step 2 and following.
1 2
1 Popup button
Opens the OSCILLATOR popup window.
B LEVEL knob
This adjusts the output level of the oscillator. If you
press the knob to select it, you'll be able to operate it
using the corresponding multifunction encoder.
C MODE button
This selects the type of oscillator signal. The type will
change each time you press the button.
D ASSIGN field
Indicates the bus to which the oscillator signal is sent.
You can press this field to open the OSCILLATOR
popup window.
E OUTPUT button
Turns the oscillator on/off.
164
M7CL Owner's Manual
Using the oscillator
3 4 5
2
Press the popup button or the ASSIGN field
to open the OSCILLATOR popup window.
In this popup window you can make detailed settings
for the oscillator.
1
1 MODE field
Press a button in this field to select the type of oscilla-
tor. This operation can also be performed using the
MODE button in the MONITOR screen.
B Parameter field
Here you can adjust the parameters for the oscillator
you selected in the MODE field. The knobs shown in
this field can be operated using the corresponding mul-
tifunction encoders.
C OUTPUT button
Turns the oscillator on/off. This operation can also be
performed using the OUTPUT button in the MONI-
TOR screen.
When the power is turned off, the oscillator will be
turned off.
D Oscillator level
This indicates the output level of the oscillator.
E ASSIGN field
Selects the bus(es) to which the oscillator signal will
be sent. You can press the CLEAR ALL button to
defeat all selections.
3
Press a button in the MODE field to select
the type of signal you want to output.
You can choose the following signals.
SINE WAVE 1CH Single-channel sine wave
PINK NOISE Pink noise
BURST NOISE Burst noise (repeated output of pink noise)
2 5 3 4