Converting And Loading The File Content From A Usb Storage Device - Yamaha M7CL Owner's Manual

Using a USB storage device to save/load data
Converting and loading the file
content from a USB storage
device
Here's how to convert and load the patch settings for the
internal/external HA of an M7CL setting file (.M7C) that
was saved to a USB storage device by the M7CL V3. The
original setting file remains intact. Save the converted file
as a different file, if necessary.
After conversion, the patch settings change as follows:
• Conversion between the M7CL-32/48's INTERNAL HA
and an external HA connected to the M7CL-32/48
Using Internal HA
INPUT 1–16
INPUT 17–32
INPUT 33–48
ST IN 1L–4R
SLOT1 IN 1–16
SLOT2 IN 1–16
SLOT3 IN 1–16
TALKBACK
OMNI OUT 1–16
SLOT1 OUT 1–16
SLOT2 OUT 1–16
SLOT3 OUT 1–16
2TR DIGITAL OUT
• Conversion between an external HA connected to the
M7CL-32/48 and M7CL-48ES
Using External HA via Slot
INPUT 1–16
INPUT 17–32
INPUT 33–48
ST IN 1L–4R
SLOT1 IN 1–16
SLOT2 IN 1–16
SLOT3 IN 1–16
TALKBACK
OMNI OUT 1–16
SLOT1 OUT 1–16
1–8
SLOT2 OUT
9–16
No assign
SLOT3 OUT 1–16
2TR DIGITAL OUT
* The same HA settings will be used.
NOTE
• If you plan to convert a file that was saved by the M7CL V2.0 or
earlier, first load the file, save it using the M7CL V3.0 or later, then
convert the newly saved file.
220
M7CL Owner's Manual
Using External HA via Slot
↔*
SLOT1 IN 1–16
↔*
SLOT2 IN 1–16
↔*
SLOT3 IN 1–16
↔
ST IN 1L–4R
↔
INPUT 1–16
↔
INPUT 17–32
↔
INPUT 33–48
↔
TALKBACK
↔
SLOT1 OUT 1–16
↔
OMNI OUT 1–16
↔
SLOT2 OUT 1–16
↔
SLOT3 OUT 1–16
↔
2TR DIGITAL OUT
M7CL-48ES
↔*
SLOT1 IN 1–16
↔*
SLOT2 IN 1–16
↔*
SLOT3 IN 1–16
↔
OMNI IN 1–8
↔
ES IN 1–16
↔
ES IN 17–32
↔
ES IN 33–48
↔
TALKBACK
↔
SLOT1 OUT 1–16
↔
ES OUT 1–16
↔
ES OUT 17–24
↔
OMNI OUT 1–8
↔
SLOT2 OUT 1–16
↔
SLOT3 OUT 1–16
↔
2TR DIGITAL OUT
1
In the function access area, press the
SETUP button to access the SETUP screen.
2
Press the SAVE/LOAD button to access the
SAVE/LOAD popup window.
STAGE BOX DATA
CONVERSION button
3
To select the file you want to load, press the
desired file in the file list, or turn multifunc-
tion encoder on the panel.
The highlighted line in the file list indicates the file
that is selected for operations.
SAVE/LOAD button
File list