SOFTWARE. • You may permanently transfer to a third party all your rights in the SOFTWARE, provided that you do not retain any copies and the recipient reads and agrees to the terms of this Agreement.
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conﬂict of laws. Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction ﬁnds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.
Ethernet cable. Connection of computer and the M7CL Connect the computer to the M7CL by using an Ethernet cable via a network switch. When you connect the computer to the M7CL directly, use a crossover cable. Ethernet cable...
Click [Remove] for the DME-N Network Driver. Follow the onscreen instructions to uninstall the driver. If you attempt to reinstall the software after uninstalling it without ﬁrst restarting your computer, the following message will appear and the install process will be aborted.
When running under Windows Vista / 7, the “User Account Control” dialog box may appear. Click [Continue]. If an application that uses the DME-N Network Driver is running at this time the “Quit all applications that use the DME-N Network Driver in order to change settings.”...
[New] Button Click this button to add a new device to the list. Edit the device’s parameters as required via the ﬁelds in the device information area (2) below the list, then click the [Apply] button to add the speciﬁed device.
“UNIT256,” but the name can be edited as required in the Device Name ﬁeld. Device IP Address The IP address of the device selected in the Target Device List can be set via these ﬁelds. Refer to the manual of the corresponding device for details on checking and setting its IP address.
Only MAC addresses of devices on the same subnet as the computer can be detected. Before searching for MAC addresses make sure that the computer is connected to the subnet to be searched, and that an appropriate IP address is assigned.
) [Export Setup to File] Button It is possible to save the setup data to a ﬁle that can then be reloaded when working in a different environment. Click to open the “Saves the current ﬁle with a new name” dialog box.
Enter your computer’s IP address into [IP address], the Gateway’s IP address into [Default gateway], and “255.255.255.0” into [Subnet mask]. When installing on the same subnet as the DME unit(s), set the gateway’s host address to 254. Click [OK]. Restart your computer.
Enter your computer’s IP address into [IP address], the Gateway’s IP address into [Default gateway], and “255.255.255.0” into [Subnet mask]. When installing on the same subnet as the DME unit(s), set the gateway’s host address to 254. DME-N Network Driver Installation Guide for M7CL...
• Did you enter an appropriate IP address of the M7CL? Set the IP address of the M7CL at the Network popup window which is recalled from the SETUP screen of the M7CL. If you are connecting the M7CL to your computer in a one-to-one connection, we recommend that you make the following initial settings.
If using other security software: Either set the security software to allow use of TCP port 12300 on the network card being used by the DME-N Network Driver, or disable the security software. U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation ©...