Performing Final End User Configuration Steps - Cisco CP-7942G Software Manual

Performing Final End User Configuration Steps

g.
h.
i.
j.
k.
l.
Performing Final End User Configuration Steps
If you are not already on the End User Configuration page, choose User Management > End User to
perform some final configuration tasks. Use the Search fields and the Find button to locate the user (i.e.
John Doe), then click on the user ID to get to the End User Configuration window for the user.
In the End User configuration window, do the following:
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
E-6
External Phone Number Mask—Indicate phone number (or mask) that is used to send Caller ID
–
information when a call is placed from this line.
You can enter a maximum of 24 number and "X" characters. The Xs represent the directory
number and must appear at the end of the pattern.
Example: Using the john doe extension in the example above, if you specify a mask of
408902XXXX, an external call from extension 6640 displays a caller ID number of
4089026640.
This setting applies only to the current device unless you check the check box at right
Note
(Update Shared Device Settings) and click the Propagate Selected button. (The check
box at right displays only if other devices share this directory number.)
Click Save.
Click Associate End Users at the bottom of the window to associate a user to the line being
configured. Use the Find button in conjunction with the Search fields to locate the user, then check
the box next to the user's name, then click Add Selected. The user's name and user ID should now
appear in the "Users Associated With Line" pane of the Directory Number Configuration window.
Click Save. The user is now associated with Line 1 on the phone.
If your phone has a second line, configure Line 2.
Associate the user with the device:
Choose User Management > End User.
–
Use the search boxes and the Find button to locate the user you have added (i.e. doe for the last
–
name).
Click on the user ID (i.e. johndoe). The End User Configuration window appears.
–
Click Device Associations.
–
Use the Search fields and the Find button to locate the device with which you want to associate
–
to the user. Select the device, then click Save Selected/Changes. The user is now associated
with the device.
– Click the Go button next to the "Back to User" Related link in the upper-right corner of the
screen.
Proceed to Performing Final End User Configuration Steps, page
Appendix E Basic Phone Administration Steps
E-6.
OL-15483-01