Displaying A Configuration Menu - Cisco CP-7942G Software Manual

Configuration Menus on the Cisco Unified IP Phone
•
•
•
•

Displaying a Configuration Menu

To display a configuration menu, perform the following steps.
You can control whether a phone has access to the Settings menu or to options on this menu by using the
Note
Settings Access field in the Cisco Unified Communications Manager Administration Phone
Configuration window. The Settings Access field accepts these values:
•
•
•
If you cannot access an option on the Settings menu, check the Settings Access field.
Procedure
Press the Applications Menu button.
Step 1
Press the Settings button to access the Settings menu.
Step 2
Perform one of these actions to display the desired menu:
Step 3
•
•
Step 4 To display a submenu repeat
To exit a menu, press the Exit softkey.
Step 5
Related Topics
•
•
•
•
•
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
4-2
Editing Values, page 4-3
Overview of Options Configurable from a Phone, page 4-4
Network Configuration Menu, page 4-5
Device Configuration Menu, page 4-11
Enabled—Allows access to the Settings menu.
Disabled—Prevents access to the Settings menu.
Restricted—Allows access to the User Preferences menu and allows volume changes to be saved.
Prevents access to other options on the Settings menu.
Use the Navigation button to select the desired menu and then press the Select softkey.
Use the keypad on the phone to enter the number that corresponds to the menu.
Step
Unlocking and Locking Options, page 4-3
Editing Values, page 4-3
Overview of Options Configurable from a Phone, page 4-4
Network Configuration Menu, page 4-5
Device Configuration Menu, page 4-11
Chapter 4
3.
Configuring Settings on the Cisco Unified IP Phone
OL-15483-01