Appendix; Basic Phone Administration Steps; Example User Information For These Procedures - Cisco CP-7942G Software Manual

Basic Phone Administration Steps

This appendix provides minimum, basic configuration steps for you to do the following:
•
•
•
•
The procedures provide one method for performing these tasks and are not the only way to perform these
tasks. They are a streamlined approach to get a new user and corresponding phone running on the system.
These procedures are designed to be used on a mature Cisco Unified Communications Manager system
where calling search spaces, partitions, and other complicated configuration have already been done and
are in place for existing users.
This section contains these topics:
•
•
•
•

Example User Information for these Procedures

In the procedures that follow, example are given when possible to illustrate some of the steps. Sample
user and phone information used throughout these procedures includes:
•
•
•
•
•
•
OL-15483-01
Add a new user to Cisco Unified Communications Manager Administration
Configure a new phone for that user
Associate that user to that phone
Complete other basic end-user configuration tasks
Example User Information for these Procedures, page E-1
Adding a User to Cisco Unified Communications Manager, page E-2
Configuring the Phone, page E-3
If you are not already on the End User Configuration page, choose User Management > End User to
perform some final configuration tasks. Use the Search fields and the Find button to locate the user
(i.e. John Doe), then click on the user ID to get to the End User Configuration window for the user.,
page E-6
User's Name: John Doe
User ID: johndoe
Phone model: 7961G
Protocol: SCCP
MAC address listed on phone: 00127F576611
Five-digit internal telephone number: 26640
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
A P P E N D I X
E
E-1