Network Configuration Menu - Cisco CP-7942G Software Manual

Unified ip phone administration guide for cisco unified communications manager 7.0 (sccp and sip)
Hide thumbs Also See for CP-7942G:
Table of Contents

Advertisement

Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Table 4-1
Settings Configurable from the Phone (continued)
Category
TFTP settings
Related Topics

Network Configuration Menu

The Network Configuration menu provides options for viewing and making a variety of network
settings.
them.
For information about how to access the Network Configuration menu, see the
Configuration Menu" section on page
The phone also has a Network Configuration menu that you access directly from the Settings menu. For
Note
information about the options on that menu, see the
page
Before you can change an option on this menu, you must unlock options as described in the
and Locking Options" section on page
configuration options appear only if options are unlocked.
For information about the keys you can use to edit options, see the
Table 4-2
Network Configuration Menu Options
Option
IPv4 Configuration
IPv6 Configuration
OL-15483-01
Description
If you do not use DHCP to direct the phone to a TFTP
server, you must manually assign a TFTP server. You can
also assign an alternative TFTP server to use instead of
the one assigned by DHCP.
Displaying a Configuration Menu, page 4-2
Unlocking and Locking Options, page 4-3
Editing Values, page 4-3
Network Configuration Menu, page 4-5
Device Configuration Menu, page 4-11
Table 4-2
and
Table 4-3
4-24.
Description
In the IPv4 Configuration menu, you can do the following:
Enable or disable the phone to use the IP address that
is assign by the DHCP server.
Manually set the IP Address, Subnet Mask, Default
Routers, DNS Server, and Alternate TFTP servers.
For more information on the IPv4 address fields, refer to
Table
4-3.
This menu setting is disabled in this release.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
describe these options and, where applicable, explains how to change
4-2.
"Network Configuration Menu" section on
4-3. The Edit, Yes, or No softkeys for changing network
Network Configuration Menu
Network Configuration Menu Option
TFTP Server 1
Alternate TFTP
TFTP Server 2
"Displaying a
"Editing Values" section on page
To Change
Unlock network configuration
1.
options.
Scroll to IPv4 Configuration and
2.
press the Select softkey.
"Unlocking
4-3.
4-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

7942g7962g

Table of Contents