Cisco CP-7942G Software Manual page 84

Device Configuration Menu
Table 4-13 UI Configuration Menu Options (continued)
Option Description
Reverting Focus Indicates whether the phone shifts the call focus
Priority on the phone screen to an incoming call or a
reverting hold call. Settings include:
Lower—Focus priority given to incoming calls.
Higher—Focus priority given to reverting calls.
Even—Focus priority given to the first call.
Auto Call Select Indicates whether the phone automatically shifts
the call focus to an incoming call on the same line
when the user is already on a call.
When this option is enabled, the phone shifts the
call focus to the most recent incoming call.
When this option is disabled, all automatic focus
changes, including Auto Line Select, are disabled
regardless of their setting.
Default: Enabled
"more" Softkey Timer Indicates the number of seconds that additional
softkeys are displayed after the user presses
more. If this timer expires before the user presses
another softkey, the display reverts to the initial
softkeys.
Range: 5 to 30; 0 represents an infinite timer.
Default: 5
Wideband Headset UI Indicates whether the user can configure the
Control Wideband Headset option in the phone user
interface.
Values:
•
•
Default: Enabled
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
4-18
Enabled—The user can configure the
Wideband Headset option in the Audio
Preferences menu on the phone (choose
> User Preferences > Audio
Preferences> Wideband Headset).
Disabled—The value of the Wideband
Headset option in Cisco Unified
Communications Manager Administration
gets used (see Media Configuration Menu,
page 4-19).
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
From Cisco Unified Communications Manager
Administration, choose System > Device Pool.
See also: Hold Reversion.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
OL-15483-01