Cisco CP-7942G Software Manual page 110

Telephony Features Available for the Cisco Unified IP Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Quality Reporting Tool Allows users to use the QRT softkey on a phone to
(QRT) submit information about problem phone calls.
QRT can be configured for either of two user
modes, depending upon the amount of user
interaction desired with QRT.
Redial Allows users to call the most recently dialed phone
number by pressing a button.
Ring setting Identifies ring type used for a line when a phone
has another active call.
Secure Conference
Services Allows you to use the Cisco Unified IP Phone
Services Configuration menu in Cisco
Unified Communications Manager Administration
to define and maintain the list of phone services to
which users can subscribe.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
5-12
Allows secure phones to place conference
•
calls using a secured conference bridge.
As new participants are added by using
•
Confrn, Join, cBarge, Barge softkeys or
MeetMe conferencing, the secure call icon
displays as long as all participants use secure
phones.
• The Conference List displays the security level
of each conference participant. Initiators can
remove non-secure participants from the
Conference List. (Non-initiators can add or
remove conference participants if the
Advanced Adhoc Conference Enabled
parameter is set.)
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
For more information refer to:
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP Phones"
chapter.
Cisco Unified Communications Manager
•
Features and Services Guide, "Quality
Report Tool" chapter.
Requires no configuration.
For more information refer to:
Cisco Unified Communications Manager
•
Administration Guide, "Directory Number
Configuration" chapter.
• Cisco Unified Communications Manager
Features and Services Guide, "Custom
Phone Rings" chapter.
"Creating Custom Phone Rings" section
•
on page 6-2.
For more information about security, see the
"Overview of Supported Security Features"
section.
For additional information, refer to:
Cisco Unified Communications Manager
•
System Guide, "Conference Bridges"
chapter
Cisco Unified Communications Manager
•
Administration Guide, "Conference
Bridge Configuration" chapter
• Cisco Unified Communications Manager
Security Guide.
For more information refer to:
• Cisco Unified Communications Manager
Administration Guide, "Cisco Unified IP
Phone Configuration" chapter.
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP Phone
Services" chapter.
OL-15483-01