HP 1606 Release Note page 46

Closed fixes summary
Web Tools session got expired before the session time out value and
also OutOfMemoryError Exception given when launched from DCFM.
Domain ID offset for the supported M model switch toggles in Device
Tree and Topology.
The affected port count is shown twice for the switches which were
segmented from a fabric and rediscovered separately.
Web Tools is not launched for the switches in the SSL enabled server
after migration.
In the FCIP Tunnel dialog box, for the 1606 extension SAN switch,
Router Icon has been shown, but in the topology, it has been shown
as Switch Icon.
Marching Ants is not shown for GigE ports with one FCIP Tunnel in
1606 extension SAN switches.
Web Tools window comes up with invalid session when launched for
Logical Switches.
Import of firmware to repository fails with two different error messages
that are not appropriate.
Show port option is grayed out when a right click is made on the
storage.
When the Client is kept idle for some time, unable to recover connec-
tion to server error message is displayed.
FICON- port name > 24 gets a inadequate error message "make sure
name is not null" in return. Unable to change the name, but no inform-
ation as to why.
In the Compare Merge dialog box, domain ID and port number are
not shown in editable db after adding the members to zone / merging
the zones from reference zone db when Hex is selected.
Migration is failed while doing remote migration from DCFM 10.3.0
to 10.3.1 after coming back from FTP server page with the selection
of PPE in trial edition page.
Unable to import the firmware file if the import fails or that firmware
when importing previously.
Mi10k is not getting manageability in topology but Discovery dialog
box status shows it is manageable.
Connection between an unmanageable McDATA switch and Access
Gateway was not displayed after relaunching the client.
46
Solution
Workaround prior to upgrade: Launch
WT via IE.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Workaround prior to upgrade: After
re-launching the Compare Merge
dialog box, Domain ID and port
number is shown in editable zone db.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Workaround prior to upgrade:
Manually delete the file under ftproot
if firmware import fails.
Fixed in DCFM 10.4.0.
Workaround prior to upgrade: Open
a new client after 5 Minutes.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.