HP 1606 Release Note page 32

Closed fixes summary
DCFM schedule backup drifts. Customer is seeing the back drift over
time from the time he set. Over three days, it drifts more than a minute.
Customer reported that this continues through the month.
Trap forwarding not allowing IP address addition. User is not able to
add the IP address of a machine in which the client is running.
FICON: Configure Cascaded FICON Fabric dialog box hangs while
setting FICON parameters and enabling FMS mode for IM2 Fabric.
Remote client from 10.0.x is unable to upgrade automatically to 10.1.x.
Access Gateway to switch connection is not shown after the Fabrics
are merged
Cannot open discovery or see active zone config after upgrade from
EFCM 9.7.3 to DCFM 10.3.0.
Minimum bandwidth should be 10 MB/s for the tunnels created in HP
StorageWorks 1606 Extension SAN switch and DC SAN Director
Multiprotocol Extension blade.
No privileged user for Zoning Online alone able to launch a Zoning
dialog box but after some time, the Online Zone DB column becomes
empty and not able to operate Zoning dialog box.
Connection Pool Size values are not migrated from EFCM correctly
for Large SAN, leading to slow client responsiveness.
LSAN Zoning menu item is grayed out when using 4/256 Director
with Multiprotocol Router blade as the backbone fabric.
In Zoning report, Logged in status is shown as No for online E_Ports.
Port Fencing: After migration from EFCM 9.7.4 to DCFM 10.3.0 the
FC address column is disappearing and the data for FC address is
coming under the threshold name.
32
Solution
Fixed in DCFM 10.4.0.
Workaround prior to upgrade: The
trap forwarding issue occurs only
when the client IP matches the trap
recipient IP, the workaround would
be to try on a different client IP.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Workaround prior to upgrade: Launch
the remote client from the browser
instead of just clicking on the old short
cut menu icon. This will update the
short cut menu version.
Fixed in DCFM 10.4.0.
Workaround prior to upgrade:
Rediscover the Fabric.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Workaround prior to upgrade:
Change the SAN Size to Medium and
then to Large in the Option dialog
box.
Fixed in DCFM 10.4.0.
Workaround prior to upgrade: 1.
User can launch the Zoning dialog
box and in the listed scope select the
LSAN zoning scope. 2. Unmonitor
and monitor the Backbone fabric.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.