HP 1606 Release Note page 34

Closed fixes summary
F_Ports connected to Access Gateway are not shown as attached ports
under the switch.
Incorrect Domain ID Displayed in Hover Help and Properties dialog
box for IM2 fabric.
Logical Switch dialog box is blank for the new OUI VF capable switch.
Unable to discover the Mi10k partition if one or more unsupported
switches are present in the fabric.
DCFM 10.1.x Inadequate warning provided before Zone configuration
deactivation.
DCFM services will not install.
When a logical switch is edited through DCFM, the GUI takes a long
time to update.
In User Management dialog box, EMail Notification column is not
sorted correctly when users by ID, Description, EMail Notification,
EMail Address fields in Users Panel so that a mismatch occurs in event
notification enabled Users.
In Add FCIP Tunnel dialog box VEX option got enabled, after adding
the circuit with gigE ports of multiprotocol extension blade.
In FCIP Tunnel dialog box, "Switch-two" name was not shown for the
tunnels when we add "Second side" tunnel for the already configured
"One Side" tunnel.
SNMP Setup dialog box lists the v3 options when SNMP v1 parameter
is selected in the trap forwarding tab.
Deletion of circuit through CLI is not updated in the FCIP Tunnels dialog
box.
Domain Offset is not added to the port address of the M-EOS switches.
Not able to login to Linux Client and no window is launched when
valid user name and password is entered and exceptions given on the
client side.
Active client is not logged-out when the corresponding resource group
is deleted where the user is assigned.
Rename the "Selective Ack Off" check box as "Selective Ack" in the
FCIP Circuit Advanced Settings dialog box and when the option is
checked, Selective Ack should be set "On" in the circuit and vice versa.
Status of the Selective Ack should be displayed as Off/On instead of
0/1 in the Circuit Tab of the FCIP Tunnels dialog box.
34
Solution
Workaround prior to upgrade: After
restarting DCFM Server Services and
all new information are displayed
correctly.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Workaround prior to upgrade: Close
and open the FCIP Tunnel dialog box.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.