HP 1606 Release Note page 26

Hp storageworks b-series data center fabric manager enterprise, professional plus, and professional 10.4.5a release notes (5697-
Hide thumbs Also See for 1606:
Table of Contents

Advertisement

Verifying SLP service installation and operation on UNIX systems
To verify:
1.
Open a command window.
2.
Type % su root and press Enter to become the root user.
3.
Type # Management_Application/cimom/bin/slptool findsrvs
service:service-agent and then press Enter to verify the SLP service is running as a Service
Agent (SA).
4.
Type # < Management_Application >/cimom/bin/slptool findsrvs service:wbem
and then press Enter to verify the SLP service is advertising its WBEM services.
5.
Choose one of the following options to verify that the SLP service is advertising the WBEM SLP
template over its configured client protocol adapters:
Type # Management_Application/cimom /bin/slptool findattrs ser-
vice:wbem:http://IP_Address:Port and press Enter.
Type # Management_Application/cimom /bin/slptool findattrs ser-
vice:wbem:https://IP_Address:Port and press Enter.
NOTE:
IP_Address:Port is the IP address and port number that display when you use the
slptool findsrvs service:wbem command.
SLP on Windows systems
This section describes how to verify the SLP daemon on Windows systems.
SLP file locations on Windows systems:
SLP log Management_Application\cimom \cfg\slp.log
SLP daemon Management_Application\cimom\cfg\slp.conf
You can reconfigure the SLP daemon by modifying this file.
SLP register Management_Application\cimom\cfg\slp.reg
You can statically register an application that does not dynamically register with SLP using SLPAPIs
by modifying this file. For more information about these files, read the comments contained in
them, or go to http://www.openslp.org/doc/html/UsersGuide/index.html.
Verifying SLP service installation and operation on Windows systems
To verify:
1.
Launch the Server Management Console from the Start menu.
2.
Click Start to start the SLP service.
3.
Open a command window.
4.
Type cd c:\Management_Application\cimom \bin and press Enter to change to the
directory where slpd.bat is located.
5.
Type > slptool findsrvs service:service-agent and press Enter to verify the SLP
service is running as a Service Agent.
26

Advertisement

Table of Contents
loading

Table of Contents