HP 1606 Release Note page 15

Debug flag should be set to 0x90010 (even though the dialog indicates the supported range of
0x00000000 to 0xFFFFFFFF). Configuring this setting with any other value will interfere with the
FICON Tape Write pipelining settings. This is applicable to versions 10.4.0, 10.4.1, 10.4.2, and
10.4.5.
Displaying logical switches
Logical switches that are created through the Logical Switch dialog box are displayed in the existing
Logical Switches Panel > Undiscovered Logical Switch list.
To ensure that logical switches display properly, discover the new logical fabric.
Device Port update in Topology view
In a Non-VF environment, a device port status update can take from 2 to 30 minutes (based on SAN
size) to update in the GUI when all of the following conditions exist:
The switches are discovered using SNMPv3.
Soft Serial Number (SSN) is configured.
EXT MIB is enabled.
To ensure that the GUI is updated within 1 to 3 minutes (based on SAN size), disable EXT MIB.
Updating the FTP server table
Use this procedure only when there is a change in the DCFM server IP (System IP) address. It updates
the FTP Server IP address with the current IP address.
To update the FTP server table with a new IP Address:
1. Browse to DCFM_Home location \db\Sybase Central 5.0.0\win32.
2. Click scjview.exe to launch the DB application.
3. From the menu bar, select Connections > Connect with SQL Anywhere 10.
The Connect window opens.
4. On the Identification tab, enter dcfm in the user ID box, password in the password box, and then
click OK.
The Sybase Central window opens.
5. In the folders pane, select SQL Anywhere 10 > dcfmdb > dcfmdb - dcfm > Tables.
A list of tables appears in the right pane.
6. Scroll down the Tables pane and double-click FTP_SERVER.
FTP_SERVER information appears in the right pane.
7. In the FTP_SERVER pane, select the Data tab.
8. Right-click the record with TYPE 0 (internal), and select Edit Row.
9. Enter the new IP and press Enter.
IMPORTANT:
Do not modify any other column.
10. Close the DB Connection, and then close the application.
B-series Data Center Fabric Manager Enterprise, Professional Plus, and Professional 15