HP 1606 Release Note page 42

Closed fixes summary
Focus is removed from the Port when double clicking the Port Name
Column but user could still modify the port name.
Server Tokens has not been set in Apache on the DCFM. Server inform-
ation could be accessed by third-party tools.
Warning message in IP Configuration option in Options dialog box
needs to be modified to include the changes to be done in server IP
configuration if DNS is not configured.
Adding a detached B-Model WWN to the pure Fabric OS fabric is
changing the SCC policy to Tolerant mode.
Unable to discover the unmonitored logical switches with the same
fabric name. Getting an error stating Fabric with same name already
exists.
In the Add FCIP Circuit dialog box, VLAN ID field is enabled for 1606
Extension SAN switch and multiprotocol extension blade. But VLAN
Tagging is not supported in Discovery.
Port names with a "show as" in DCFM when retrieved from the switch.
Name does not match what is on the switch.
FICON Emulation values are not in sync with CLI; that is, CLI shows
the FICON values, but application does not show any value.
Error message is given while trying to download firmware when Ex-
ternal FTP is configured on the same machine.
After server port mapping, on clicking view created for a host displays
the blank topology for the fabric view.
EOSc switches discovered as seed loses manageability and discovery
status shows Invalid protocol.
Progress bar hangs in Server Management Console of Dual NIC PC,
when the Server IP is changed in the IP Configuration of the Options
dialog box.
User is not able to uncheck the Show Ports option in Right click menu
for discovered HBA.
42
Solution
Workaround prior to upgrade: Single
click on the Port name column and
use Back Space to edit the name.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Workaround prior to upgrade:
Discover it with different fabric name
other than default name.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Workaround prior to upgrade: After
the display of blank topology, click
the viewall and then click the view
created for the fabric.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Workaround prior to upgrade: After
Changing the Server IP and restarting
the services, the progress bar hangs.
Kill the Process and try to launch the
Server management Console, the
services are started without any
issues.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.