HP 1606 Release Note page 43

Closed fixes summary
No proper error message is shown when trying to activate the zone
with seed switch in a pure MEOS fabric that is unreachable. User will
not know why the zone activation/deactivation failed.
Error message does not give sufficient information for the user when
trying to activate zones with port numbers > 255 in IM2.
CPU utilization for the process (dbsrv10.exe) is very high (about 95-
100%) when there are a number of large fabrics (more than 100
switches).
DCFM fails to delete an ACL policy from a CEE capable Switch.
Switches discovered through SNMPV1 are getting listed in the Informs
table, which is supported only for switches discovered through SNM-
PV3.
In Pure MEOS fabric, the Plus symbol is not removed from the device
tree after giving accept changes.
DCFM does not show ISLs to connected switches in domainoffset mode
192(0xc0).
The structure of the view is not persisted in the device tree and not in
sync with the topology, when going to another view and coming back.
A few entities are not updated while creating a Standard ACL.
HBA in host group and DC SAN Backbone Director in switch group
Icons are shown alike in topology and device tree when look and feel
is set as Default/Small/Large.
"Failed to get FCIP circuit configuration: IPC error, please retry the
command" error has been given in FCIP Tunnel \ Circuit configuration
report, while creating a tunnel between DC SAN Backbone Director
switches.
Swap blade operation fails at the first time, but succeeds in the next
attempt.
Not Getting VM properties when opening the Properties dialog box
from HBA and HBA port.
HBA discovered as part of a fabric is shown in the fabric but has no
connection to anything in the fabric.
B-series Data Center Fabric Manager Enterprise, Professional Plus, and Professional
Solution
Workaround prior to upgrade:
Change the seed switch or wait for
seed switch auto failover in case of
seed switch unreachable, change the
credentials in case of authentication
failure.
Fixed in DCFM 10.4.0.
Workaround prior to upgrade:
Activation would get successful, if only
ports lesser than 256 are selected.
Fixed in DCFM 10.4.0.
Workaround prior to upgrade: Restart
the client.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Workaround prior to upgrade: Launch
a new client.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
Fixed in DCFM 10.4.0.
43