Adaptec 133U2 - AAA RAID Controller User Manual page 47

2
Click the Filter tab. The Filter dialog box appears, as shown in
Figure 3-4.
Figure 3-4. Filter Dialog Box
3
Select or deselect the check boxes to control which kinds of
messages appear in the System Monitor window and the
Historic Event Log. (We recommend that you leave all boxes
selected.) If you choose not to display some kinds of messages,
the following occurs:
– The Displayed field below the log entries counts the number
of messages that are actually displayed.
– The Total field indicates the total number of messages of all
types.
4
Click OK to record the Filter option changes.
To change the filter options only for a specific window, open the
System Monitor window or Historic Event Log and click
the toolbar. Change the options as described above and click OK.
The changed settings apply to this view only while it is open; the
settings will return to the defaults if you close and reopen the view
or if you restart Adaptec CI/O Management Software.
Entering and Viewing System Information
on
3-11