Adaptec 133U2 - AAA RAID Controller User Manual page 74

Adaptec CI/O Management Software User's Guide
6
When all disks for the new array have been selected click Next.
The Create Array - Name and Type dialog box appears, as
shown in Figure 5-4.
Figure 5-4. Create Array - Name and Type Dialog Box
7
Type a name for the new array. The name can be up to 15
characters, including spaces and any other printable
characters.
8
Highlight the desired RAID type for the array in the Select
array type window. The bar graphs on the right show the
relative levels of data protection, read performance, write
performance, and capacity utilization for each RAID type.
Note:
Only valid RAID configurations that are
possible using the specified number of disks in the
new array are displayed.
5-6