Adaptec 133U2 - AAA RAID Controller User Manual page 144

Adaptec CI/O Management Software User's Guide
set to No, then the SCSI Manager will not check for instrumentation
capable drivers.
IOInstrumentation = [Yes | No]
This option, if Yes, enables the SCSI Manager to collect I/O related
instrumentation from instrumentation capable drivers. The default
value is No. If both this option and the ErrorInstrumentation option
are set to No, then the SCSI Manager will not check for
instrumentation capable drivers.
ResetInstrumentationOnPowerup = [Yes | No]
This option tells the SCSI Manager whether or not to issue an
Instrumentation Reset to each instrumentation capable driver when
the SCSI Manager initializes. The default value is Yes, which enables
Instrumentation Resets. If both the ErrorInstrumentation and the
IOInstrumentation options are set to No, this option has no effect.
ResetInstrumentationOnDiscovery = [Yes | No]
This option tells the SCSI Manager whether or not to issue an
Instrumentation Reset to each instrumentation capable driver when
that driver is newly discovered. The default value is Yes, which
enables Instrumentation Resets. If both the ErrorInstrumentation
and the IOInstrumentation options are set to No, this option has no
effect.
SMARTPolling = [Yes | No]
This option tells the SCSI Manager whether or not to verify if SCSI
devices support Self Monitoring, Analysis, and Reporting
Technology (S.M.A.R.T) and if so, to monitor them for S.M.A.R.T
events. The default value is Yes, which enables SMART support.
SMARTTest = [Yes | No | testcount]
This option tells the SCSI Manager whether or not to enable the
S.M.A.R.T. test mode. For debugging purposes, S.M.A.R.T. capable
devices internally have a test bit which allow them to generate
S.M.A.R.T. events even when the hardware is not having a problem.
The default value is No, which does not enable any S.M.A.R.T.
debug events. Choosing option Yes turns the S.M.A.R.T. debug bit
on for all S.M.A.R.T. capable devices and leaves it on. Providing a
count instead of Yes turns the S.M.A.R.T. debug bit on until the
A-4