Table of Contents
Advertisement
– Notification delay: If you select enabled, the event
notification will not be sent for the period of time you
specify and the Critical Event severity box will be
automatically checked. Use this option to register recipients
that you want to notify in case there is no response within
the notification delay time.
– Event severity: Select the type of event(s) you want to
receive. See Interpreting and Responding to Event Messages on
page page 3-17 for additional information.
Note:
In order for recipients to receive event severity
notices, you must check the Email checkbox in the
Preferences Event Notification dialog box (see Figure
Figure 3-5). The Email box must be checked for both
non-critical and critical event severity types.
6
Click OK.
Viewing Historical Information
Use the Historic Event Log to view historical information for any
system to which you are connected. If you are running the console
version of the Adaptec CI/O Management Software on a windows
NT system, you can view information for this one system. If you are
running the networked version of CI/O Management Software, you
can view information for any system to which your are connected
after you select its icon in the System Monitor window.
Follow these steps to view historical event information:
Entering and Viewing System Information
3-15
Advertisement
Table of Contents
