Table of Contents
Advertisement
4
Type the new password again in the Confirm Password field.
5
Click OK to accept the new password.
Setting Password Time-out Options
The Password Time-out options allow you to control the way in
which users are prompted to enter the system's Adaptec CI/O
Management Software password when they issue commands to
change a system's array configuration. The Password Time-out
options are set individually for each networked client.
Follow these steps to change the Password Time-out options:
1
Click
to open the Preferences dialog box and click the
Password tab to display the Password dialog box as shown in
Figure 9-2.
Figure 9-2. Password Dialog Box
2
Select one of the three Password time-out options. Here is a
description of the options:
– Prompt only on first operation: Requires you to enter the
password only the first time (during each session) that you
issue a command to change array configuration. This option
provides somewhat less security than the others: if you
leave your client or workstation unattended after entering
the password, another person can issue commands from the
workstation without being prompted for the password.
Setting Security Options
9-3
Advertisement
Table of Contents
