Configuration Settings
EnableRAID10=
This variable enables or disables the option of creating RAID 0/1
arrays. If it is set to No users cannot create RAID 0/1 arrays. Valid
values are Yes and No. The default is Yes.
[ENCLOSUREMANAGER]
EnabledEnclosureInterfaces=SAF-TE
This specifies the enclosure management interfaces which are
supported by CI/O. Currently only SAF-TE is supported.
SAF-TEPollingPeriodInSeconds=5
This is the polling frequency for SAF-TE in seconds. It is the interval
at which the SAF-TE enclosure is polled to check for status of all ele-
ments of the enclosure like power supplies, fans, etc.
A-9