MACROMEDIA FLASH MX 2004-USING COMPONENTS Use Manual page 867

Method summary for the WebServiceConnector class
The following table lists the method of the WebServiceConnector class.
Method
WebServiceConnector.trigger()
Property summary for the WebServiceConnector class
The following table lists properties of the WebServiceConnector class.
Property
WebServiceConnector.multipleSimultaneousAllowed
WebServiceConnector.operation
WebServiceConnector.params
WebServiceConnector.results
WebServiceConnector.suppressInvalidCalls
WebServiceConnector.timeout
WebServiceConnector.WSDLURL
Event summary for the WebServiceConnector class
The following table lists events of the WebServiceConnector class.
Event
WebServiceConnector.result
WebServiceConnector.send
WebServiceConnector.status
Description
Initiates a call to a web service.
Description
Indicates whether multiple calls can take
place at the same time.
Indicates the name of an operation that
appears within the SOAP port in a WSDL file.
Specifies data that will be sent to the
server when the next
is executed.
Identifies data that was received from the
server as a result of the
Indicates whether to suppress a call if
parameters are invalid.
Specifies a time period (in seconds) in which
the web service connection will fail if results
do not come back.
Specifies the URL of the WSDL file that
defines the web service operation.
Description
Broadcast when a call to a web service
completes successfully.
Broadcast when the
process, after the parameter data has been
gathered but before the data is validated and
the call to the web service is initiated.
Broadcast when a call to a web service is
initiated, to inform the user of the status of
the operation.
WebServiceConnector component (Flash Professional only)
operation
trigger()
operation.
trigger()
method is in
trigger()
867