MACROMEDIA FLASH MX 2004-USING COMPONENTS Use Manual page 594

Property summary for the NumericStepper class
The following table lists properties of the NumericStepper class.
Property
NumericStepper.maximum
NumericStepper.minimum
NumericStepper.nextValue
NumericStepper.previousValue
NumericStepper.stepSize
NumericStepper.value
Properties inherited from the UIObject class
The following table lists the properties the NumericStepper class inherits from the UIObject class.
When calling these properties from the NumericStepper object, use the form
NumericStepper.propertyName
Property
UIObject.bottom
UIObject.height
UIObject.left
UIObject.right
UIObject.scaleX
UIObject.scaleY
UIObject.top
UIObject.visible
UIObject.width
UIObject.x
UIObject.y
594 Chapter 6: Components Dictionary
Description
A number indicating the maximum range value.
A number indicating the minimum range value.
A number indicating the next sequential value. This property is
read-only.
A number indicating the previous sequential value. This property is
read-only.
A number indicating the unit of change for each click.
A number indicating the current value of the stepper.
.
Description
The position of the bottom edge of the object, relative to the
bottom edge of its parent. Read-only.
The height of the object, in pixels. Read-only.
The left edge of the object, in pixels. Read-only.
The position of the right edge of the object, relative to the right
edge of its parent. Read-only.
A number indicating the scaling factor in the x direction of the
object, relative to its parent.
A number indicating the scaling factor in the y direction of the
object, relative to its parent.
The position of the top edge of the object, relative to its parent.
Read-only.
A Boolean value indicating whether the object is visible (
not ( ).
false
The width of the object, in pixels. Read-only.
The left edge of the object, in pixels. Read-only.
The top edge of the object, in pixels. Read-only.
) or
true