Copying A Cup Port Connectivity Configuration; Deleting A Cup Port Connectivity Configuration; Cup Logical Path Configuration; Viewing Cup Logical Path Configurations - Brocade Communications Systems 8 Administrator's Manual

4. Optional: Click Active=Saved Mode to enable (selected) or disable (not selected) the
5. Click Yes to activate the configuration or click No to cancel the activation.

Copying a CUP port connectivity configuration

Use the following procedure to copy a CUP port connectivity configuration to a new configuration.
1. Display the CUP port connectivity configuration list.
2. Select a saved configuration or the active configuration from the list.
3. Click Copy.
4. In the dialog box, enter a name and description for the new configuration and click OK to save

Deleting a CUP port connectivity configuration

Use the following procedure to delete a saved CUP port connectivity configuration.
1. Display the CUP port connectivity configuration list.
2. Select the saved configuration from the list.
3. Click Delete.
4. Click Yes to delete the selected configuration; click No to cancel the deletion.

CUP logical path configuration

The logical reporting path is a CUP mechanism for sending FRU-failure type reports to a FICON
Logical Path via the FICON Protocol.

Viewing CUP logical path configurations

Use the following procedure to display a list of CUP logical path configurations.
1. Select a FICON-enabled switch from the Fabric Tree.
2. Select Tasks > Manage > Switch Admin.
3. Click Show Advanced Mode to see all the available tabs and options.
4. Select the FICON CUP tab.
5. Click the CUP Logical Paths subtab.
Web Tools Administrator's Guide
53-1001772-01
DRAFT: BROCADE CONFIDENTIAL
Active=Saved FMS parameter after the configuration is activated.
The Copy CUP Port Connectivity Configuration dialog box displays.
the configuration to the target file; click Cancel to cancel copying the configuration.
The file name must be in alphanumeric characters and can contain only dashes or
underscores as special characters.
The Delete CUP Port Connectivity Configuration confirmation dialog box displays.
The FICON CUP page displays the FICON Management Server page in front. All attributes on
this page are read-only until FMS mode is enabled.
CUP logical path configuration
18
251