Configuring Fc Ports; Figure 29 Port Administration Window, Table View - Brocade Communications Systems 8 Administrator's Manual

Ports on a non-owned switch that are not E_Ports and are neither direct nor indirect members of
the current Admin Domain are inaccessible and are not displayed in the Port Administration
window.
FIGURE 29

Configuring FC ports

With the FC Port Configuration wizard, you can configure allowed port types, port speed, and long
distance mode for physical ports.
You must use Web Tools with the EGM license enabled on the switch to configure long distance;
otherwise, access to this feature is denied and an error message displays.
The EGM license is required only for 8 Gbps platforms, such as the following:
•
•
•
For non-8 Gbps platforms, all functionality is available without EGM license.
The following procedure describes how to open the FC Port Configuration wizard. The wizard is
self-explanatory, so the explicit steps are not documented here.
Web Tools Administrator's Guide
53-1001772-01
DRAFT: BROCADE CONFIDENTIAL
Port Administration window, Table view
Brocade DCX and DCX-4S enterprise-class platforms
Encryption Switch
300, 5300, and 5100 switches

Configuring FC ports

6
87