Connset Group - Brocade Communications Systems 8 Reference Manual

8

ConnSet group

TABLE 22
Definitions for FCMGMT-MIB (Continued)
Type definition Value
FcEventSeverity Integer
FcUnitType Integer
ConnSet group
Implementation of the Connectivity group is mandatory for all systems.
uNumber 1.3.6.1.3.94.1.1
The number of connectivity units present on this system (represented by this agent). Might be a
count of the boards in a chassis or the number of full boxes in a rack.
The connectivity unit is mapped to a switch. uNumber is always set to 1.
systemURL 1.3.6.1.3.94.1.2
The top-level URL of the system; if it does not exist, the value is an empty string. The URL format is
implementation dependant and can have keywords embedded that are preceded by a percent sign
(for example, %USER).
The following are the defined keywords that are recognized and replaced with data during a launch.
236
Description
1 (unknown)
2 (emergency) Emergency status.
3 (alert) Alert status.
4 (critical) Critical status.
5 (error) Error status.
6 (warning) Warning status.
7 (notify) Notification status.
8 (info) Informational status.
9 (debug) Debug status.
10 (mark) All messages logged.
1 (unknown)
2 (other) None of 3–14.
3 (hub) Passive connectivity unit supporting loop protocol.
4 (switch) Active connectivity unit supporting multiple protocols.
5 (gateway) Unit that not only converts the interface but also encapsulates the frame into
another protocol. The assumption is that there are always two gateways connected together:
for example, FC <-> ATM.
6 (converter) Unit that converts from one interface to another: for example, FC <-> SCSI.
7 (hba) Host bus adapter.
8 (proxy-agent) Software proxy agent.
9 (storage-device) Disk, CD, tape, and so on.
10 (host) Host computer.
11 (storage-subsystem) For example, RAID, library.
12 (module) Subcomponent of a system.
13 (swdriver) Software driver.
14 (storage-access-device) Provides storage management and access for heterogeneous
hosts and heterogeneous devices.
Fabric OS MIB Reference
53-1001768-01