APPENDICES
Siren
A partition is alarmed when receiving an event from
an alarmed device assigned to that partition.
Alarmed devices do not affect partitions to which
they are not assigned. A siren is common to all
partitions; therefore, an alarm from one or more
partitions will activate the siren.
Siren Activity
•
The siren will be activated when receiving an
event from an alarmed device.
•
Overlapping siren activations from different
partitions will not cause the duration of the siren
to be extended.
Partition Status display
Partitions status is indicated in the following manner:
P1:X P2:X P3:X
Each X value indicates a different partition state, as follows:
R Ready
N Not ready
A Away
H Home
E
Exit delay
D Entry delay
-
Not used
MCT-237
The MCT-237 two-way wireless keyfob is used to
control single or all partitions.
Arming/Disarming All Partitions
To arm/disarm all partitions, press the HOME /
AWAY / DISARM button on the keyfob.
Arming/Disarming a Single Partition
To
arm/disarm
a
single
PARTITION SELECTION button on the keyfob once.
In this state repeated pressing of the PARTITION
SELECTION button will toggle between the enabled
partitions and Partition All. To arm/disarm the desired
partition(s), press the HOME/AWAY/DISARM button.
38
partition,
press
the
•
When the siren sounds, it will not stop until all
alarmed partitions are disarmed. However if the
siren is active due to an alarm from a common
area zone, and one of the partitions assigned to
this area disarms the system, the siren will also
stop. In case that the alarm is initiated from a
common area but continues with zones that are
not assigned to a common area, the siren will
not stop until all partitions assigned to the
alarmed zones are disarmed.
•
In case that there is a fire in partition 1 and a
burglary in partition 2, the siren will sound FIRE.
When partition 1 is disarmed the siren will
sound BURGLAR for the remainder of the siren
timeout period.
MCT-237
AWAY
HOME
AUX 1
DISPLAY
DISARM
PARTITION
SELECTION
AUX 2
D-302755