Mcm-140; Mkp-150/Mkp-151 - Visonic POWERMAXCOMPLETE User Manual

MCM-140+

The wireless remote commander is used to control
single or all partitions.
Arming/Disarming All Partitions
To arm all partitions, press the HOME / AWAY /
DISARM button followed by the user code.
Arming/Disarming a Single Partition
To arm/disarm a single partition, press the "LIGHT"
button followed by the desired partition number (1, 2
or 3). When the red LED turns OFF, press the
HOME/AWAY/DISARM button within 5 seconds
followed by the user code.

MKP-150/MKP-151

The two-way wireless keypad is used to control single or all partitions and functions in the same way as the
PowerMaxComplete control panel. See the section on "The Show Function" above (substitute the
button with the button).
D-302755
MCM-140+
3-color
Buzzer LED
Away
2
Home
5
8
Prog.
Aux
0
mode
* #
Emer-
Fire
gency
Panic
APPENDICES
Light
Off
39