Electrical Appliance Control; Control Options And Pushbuttons; Automatic On/Off Control - Visonic POWERMAXCOMPLETE User Manual

4. Electrical Appliance Control

Control Options and Pushbuttons

The system allows manual or automatic remote
control of a device connected to the PGM output.
The user defines the ON and OFF times via the
Scheduler (see Chapter 7 - Scheduler Function). The
installer determines which zone sensors will switch the
remote controlled appliances on and off. However, the
decision whether the remote controlled appliance
will respond as programmed is up to you (see
next table).
Key Function
Manual activation of A light or other
household electrical appliance that is
connected to PGM output.
Manual deactivation of a light or other
household electrical appliance that is
connected to PGM output.
Selecting the active automatic control
method:
Sensors: The appliance is controlled
by sensors (assigned by the installer
for this).
Timer: The appliance is controlled by
timer (ON and OFF times are defined
by the installer).
Both: The appliance is controlled by
sensors as well as by a timer.
Examples of benefits gained by automatic remote
control:
•
Timer Control. When you are away, the timed
activation / de-activation
appliance.
•
Zone Control. Upon disturbance of a perimeter
zone, the electrical device is switched on.
Note: Automatic activation and deactivation of
electrical appliance depends also on the Scheduler
setup (see Chapter 7 - Scheduler Function).
D-302755
ELECTRICAL APPLIANCE CONTROL
of an electrical

Automatic ON/OFF Control

You can select two of four options:
By Timer ON
By sensor ON
The presently active options are shown with a dark
box ( ) at the far right. To view the 2 other options
click .
A presently inactive option is shown without a dark
box at the far right. The dark box will appear if you
click while the option is displayed. A
"Happy Tune" indicates successful saving of a new
option.
PRESS
If not satisfied -
press
If satisfied -
press
If not satisfied -
Press
If satisfied -
By timer OFF
By sensor OFF
RESULTANT DISPLAY
BY TIMER ON
(If this is the default)
BY TIMER OFF
BY TIMER OFF
BY TIMER OFF
BY SENSOR ON
(If this is the default)
BY SENSOR OFF
BY SENSOR OFF
BY SENSOR OFF
READY HH:MM
15