1-5 Setting the MIC Input Select
Sets whether the setup microphone is connected to the PIN JACK connector or the MINI JACK connector.
Please ask the DENON Authorized Service Center about the usable microphone other than the option setup.
1
CH SEL
ENTER
(Remote control unit)
2
CH SEL
ENTER
(Remote control unit)
3
CH SEL
ENTER
(Remote control unit)
4
CH SEL
ENTER
(Remote control unit)
1-6 Check the EQ parameter
• The frequency characteristic of each speaker is rectified and the tone of the speaker is unified.
The EQ parameters that were set in Auto Setup can be checked.
This item is automatically displayed, after the measurement result of the "Auto Setup/Room EQ" is decided.
1
CH SEL
ENTER
(Remote control unit)
2
CH SEL
ENTER
(Remote control unit)
30
Select "Mic Input Select" at the Auto Setup / Room
EQ Menu.
CH SEL
ENTER
(Main unit)
Display the Mic Input Select screen.
CH SEL
ENTER
(Main unit)
Select the Mic input jack or V.AUX L jack.
CH SEL
ENTER
(Main unit)
Enter The setting.
The Auto Setup / Room EQ Menu reappears.
CH SEL
ENTER
(Main unit)
Select "EQ parameter check" at the Auto Setup /
Room EQ Menu.
CH SEL
ENTER
(Main unit)
Display the EQ Parameter check screen.
CH SEL
ENTER
(Main unit)