Denon AVR-3805 Operating Instructions Manual page 49

After completing system setup
This button can be pressed at any time during the system setup process to complete the process.
1
(Remote control unit)
• On-screen display signals
Signals input to the AVR-3805
VIDEO signal input jack
(yellow)
1 E
C
2
3 E
C
4
E: No signal)
(C: Signal
NOTE:
• When a component video signal is input and when the "Video Input Mode" is set to the component fixed mode at Input setup, the on-screen
display is only displayed when the System Setup, Surround Parameters and On Screen buttons are operated.
Press the SYSTEM SETUP button at the System
Setup Menu.
The changed settings are entered and the on-
screen display turns off.
(Main unit)
Video signal output to VIDEO
S-video signal input jack
MONITOR OUT jack (yellow)
E
E
C
C
(C: On-screen signals output
On-screen display signal output
Video signal output to S-
Video MONITOR OUT jack
C C
C C
C C
E C
E: On-screen signals not output)
Video signal output to Color Difference
(Component) Video MONITOR OUT jack
C
C
C
C
49