3
CH SEL
ENTER
(Remote control unit)
4
CH SEL
ENTER
(Remote control unit)
Setting the Trigger Out Setup
5-3, 5-4
• Set the Trigger Out output 1 for the different input sources.
1
CH SEL
ENTER
(Remote control unit)
2
CH SEL
ENTER
(Remote control unit)
3
CH SEL
ENTER
(Remote control unit)
q Select the input source.
4
CH SEL
ENTER
(Remote control unit)
5
CH SEL
ENTER
(Remote control unit)
Set the Trigger out 2 Setup in the same way.
46
Select the desired setting.
Variable:
The level can be adjusted freely using the buttons on
CH SEL
ENTER
the remote control unit.
0 dB, -40 dB:
The output level is fixed at the set level and the
volume can no longer be adjusted.
(Main unit)
NOTE:
• When "ZONE2" is selected at System Setup Menu
"5-1.Power amp Assign", the Zone2 vol. Level is all
set to "variable" including preout level and this
menu is not displayed.
Enter the setting.
CH SEL
The Option Setup Menu reappears.
ENTER
(Main unit)
Select "Trigger Out 1 Setup" at the Option Setup
Menu.
CH SEL
ENTER
(Main unit)
Display to the Trigger Out 1 Setup screen.
CH SEL
ENTER
(Main unit)
Select the Zone (MAIN, Zone2 and Zone3).
CH SEL
ENTER
(Main unit)
w Select "ON" or "OFF".
CH SEL
ENTER
(Remote control unit)
(Main unit)
Enter the setting
The Option Setup Menu reappears.
CH SEL
ENTER
(Main unit)
CH SEL
CH SEL
ENTER
ENTER
(Main unit)