Setting The Auto Setup - Denon AVR-3805 Operating Instructions Manual

1-1 Setting the Auto Setup

1
CH SEL
ENTER
(Remote control unit)
2
CH SEL
ENTER
(Remote control unit)
3 Check the "Power Amp Assign" setting.
• When "Surround Back" is selected, the test tone during Auto Setup will be output from the Surround Back speaker.
• When "ZONE2" or "ZONE3" is selected, change the setting to "ZONE2" or "ZONE3". The test tone during Auto Setup is set so that
it will not be output to ZONE2 or ZONE3 (Another room).
q Select the Power Amp Assign setting.
CH SEL
ENTER
(Remote control unit)
4
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
(Remote control unit)
24
Select "Auto Setup" at the Auto Setup / Room EQ
Menu.
CH SEL
ENTER
(Main unit)
Display the Auto Setup screen.
CH SEL
ENTER
(Main unit)
CH SEL
ENTER
(Main unit)
q Select the "Start".
CH SEL
ENTER
(Main unit)
w Press the Cursor left button.
CH SEL
ENTER
(Main unit)
w Select "Surround Back", "ZONE2" or "ZONE3".
CH SEL
CH SEL
ENTER
ENTER
(Remote control unit)
(Main unit)
NOTE:
• When "ZONE2" or "ZONE3" is selected at System
Setup Menu "Power Amp Assign", surround back
speaker is not displayed as the target of setup in "2-
1.setting the type of speakers. The results is reflected
in "5-1.Power Amp Assign".