Denon AVR-3805 Operating Instructions Manual page 76

5 Select the various parameters.
CH SEL
ENTER
(Remote control unit)
NOTE:
• When "Default" is selected and the 0 cursor button is pressed, "MODE" and "TONE" are automatically reset to the default values and
"CINEMA EQ" is set to "OFF".
Surround parameters w
DTS NEO:6 Mode:
• Cinema
This mode is optimum for playing movies. Decoding is performed
with emphasis on separation performance to achieve the same
atmosphere with 2-channel sources as with 6.1-channel sources.
This mode is effective for playing sources recorded in conventional
surround formats as well, because the in-phase component is
assigned mainly to the center channel (C) and the reversed phase
component to the surround (SL, SR and SB channels).
Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input)
1 Select the input source.
Playback with a digital input
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 39).
(Remote control unit)
w Set the input mode to "AUTO" or "DTS".
(Remote control unit)
2 Select the STANDARD (Dolby/DTS Surround) mode.
(Remote control unit)
3
Play a program source with the
Light
Light
Light
Light
(Remote control unit)
76
CH SEL
ENTER
(Main unit)
(Main unit)
(Main unit)
(Remote control unit) (Main unit)
,
• The Dolby Digital indicator lights
when playing Dolby Digital sources.
• The DTS indicator lights when playing
DTS sources.
• Press the SURROUND Back button.
Lights when the Surround Back CH is
on.
(Main unit)
6 Adjust the parameter settings.
(Remote control unit)
• Music
This mode is suited mainly for playing music. The front channel (FL
and FR) signals bypass the decoder and are played directly so there
is no loss of sound quality, and the effect of the surround signals
output from the center (C) and surround (SL, SR and SB) channels
add a natural sense of expansion to the sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the center
channel in the DTS NEO:6 MUSIC mode has been added.
1
1
mark.
1
CH SEL
CH SEL
ENTER
(Main unit)
1 2 5, 6 3 4
2
4
5, 6
1
ENTER
2
3
3