Setting The Digital In Assignment - Denon AVR-3805 Operating Instructions Manual

Setting the Digital In Assignment

3-1
• This setting assigns the digital input jacks of the AVR-3805 for the different input sources.
1
CH SEL
ENTER
(Remote control unit)
2
CH SEL
ENTER
(Remote control unit)
3
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
(Remote control unit)
4
CH SEL
ENTER
(Remote control unit)
NOTES:
• The OPTICAL 3, 4 jacks on the AVR-3805's rear panel are equipped with an optical digital output jack for recording digital signals on a CD
recorder, MD recorder or other digital recorder. Use this for digital recording between a digital audio source (stereo - 2 channel) and a digital
audio recorder.
• Do not connect the output of the component connected to the OPTICAL 3, 4 OUT jack on the AVR-3805's rear panel to any jack other than
the OPTICAL 3, 4 IN jack.
• "PHONO" and "TUNER" cannot be selected on the Digital In Assignment.
Refer to "DENON LINK connections". (See page 14)
At the Input Setup Menu select "Digital In
Assignment".
CH SEL
ENTER
(Main unit)
Display the Digital Inputs screen.
CH SEL
ENTER
(Main unit)
Select the digital input jack to be assigned to the input source.
q Select the input source
CH SEL
ENTER
(Main unit)
w Select the digital input jack
Select "OFF" for input sources for which no digital input jacks are used.
If "Yes" is selected for "Default", the settings are automatically reset to the default
CH SEL
ENTER
values.
(Main unit)
Enter the setting.
The Input Setup Menu reappears.
CH SEL
ENTER
(Main unit)
39