Setting The Audio Delay; Setting The Dolby Digital Setup - Denon AVR-3805 Operating Instructions Manual

4
Setting the Advanced Playback
1
CH SEL
ENTER
(Remote control unit)
2
CH SEL
ENTER
(Remote control unit)

4-1 Setting the Audio Delay

This function allows you to adjust the time delay of the video and audio signals and store these settings for the different input sources.
The setting is made while watching a DVD or other software, so it is not made here.
By default, this is not displayed when no digital signals are being input.
For instructions on making the setting, refer to page 63.
NOTE:
The audio delay setting does not apply when it plays in the EXT. IN mode or in the analog input direct mode or stereo mode (TONE DEFEAT "ON").

4-2 Setting the Dolby Digital Setup

Sets the down-mixing method when not using a center speaker or surround speakers.
OFF: The dynamic range is not compressed.
ON: The dynamic range is compressed automatically according to the combination of speakers being used.
1
CH SEL
ENTER
(Remote control unit)
2
CH SEL
ENTER
(Remote control unit)
3
CH SEL
ENTER
(Remote control unit)
NOTE:
When a center speaker or surround speakers, are not used the sound is played from the front speakers.
Set "Compression" to "ON" if it seems that sound is distorted because the input level exceeds the allowable input for the front speakers.
4
CH SEL
ENTER
(Remote control unit)
Select "Advanced Play back" at the System Setup
Menu.
CH SEL
ENTER
(Main unit)
Display the Advanced Playback Menu screen.
CH SEL
ENTER
(Main unit)
Select "Dolby Digital Setup" at the Advanced
Playback Menu.
CH SEL
ENTER
(Main unit)
Press the ENTER button.
Display the Dolby Digital Setup screen.
CH SEL
ENTER
(Main unit)
Select "ON" if you want to use the Compression,
"OFF" if you do not want to use it.
CH SEL
ENTER
(Main unit)
Enter the setting.
CH SEL The Advanced Playback Menu reappears.
ENTER
(Main unit)
43