Playback; Preparations; Turning The Power On; Selecting The Input Source - Denon AVR-688 Owner's Manual

ENGLISH
SOURCE SELECT INPUT MODE
VIDEO SELECT
<SOURCE> <PHONES>
<POWER> <SPEAKER>
<ON/STANDBY> <ANALOG>
<EXT. IN>
[Front]
[OFF]
SOURCE SELECT
VIDEO SELECT
[MODE
SELECTOR 1]
[Rear]
SOURCE SELECT
TUNING
[MODE]
About the button names in these explanations
< > : Buttons on the main unit
[ ]
: Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
 
MASTER VOLUME

Playback

Preparations

Turning the Power On

1
Press
The power indicator lights red and the power is set to the standby
BAND
DIMMER
mode.
TUNING STATUS
2
Press
The power indicator flashes green and the power turns on.
[ON/SOURCE]
Turning the Power Off
q Press <ON/STANDBY> or [OFF].
The power is set to the standby mode.
[TUNER]
w Press <POWER>.
The power indicator turns off, and so does the power.
NOTE
MASTER
Power continues to be supplied to some of the circuitry even when
VOLUME
the power is in the standby mode. When leaving home for long periods
of time or when traveling, either press <POWER> to turn off the power,
[MUTING]
or unplug the power cord from the power outlet.
STATUS
DIMMER

Selecting the Input Source

[MODE
SELECTOR 2]
Operation on the main unit
[TUNER]
<SOURCE SELECT>
Turn
If "Rec Select" is selected for the input source, press <SOURCE> before
turning <SOURCE SELECT>.
Operation on the remote control unit
BAND
INPUT MODE
[SOURCE SELECT]
Press
The desired input source can be selected directly.
<POWER>
.
<ON/STANDBY> [ON/SOURCE].
or
.
.

Setting the Input Mode

Set the input mode for this source.
INPUT MODE
Press .
The INPUT mode indicator lights (AUTO, PCM, DTS mode).
AUTO PCM
※
EXT. IN ANALOG
b Press <ANALOG> to select "ANALOG" , <EXT. IN> to select "EXT.
IN" .
[Selectable items]
AUTO
: Detect type of digital input signal and decode and play
automatically.
PCM
: Decode and play only PCM input signals.
DTS
: Decode and play only DTS input signals.
ANALOG
: Play only signals from analog input.
EXT. IN
: Play only signals from EXT. IN input.
• When a digital signal is properly input, the "
on the display. If the " " indicator does not light, check the
digital input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to "EXT.
IN" .
• Only set "PCM" and "DTS" when playing the respective signals.

Operations During Playback

Adjusting the Master Volume
<MASTER VOLUME>
Either turn
VOLUME]
.
DTS
※
" indicator lights
[MASTER
or press