Denon AVR-3805 Operating Instructions Manual page 81

DSP surround simulation
1 Select the surround mode for each input channel.
(Remote control unit)
The surround mode switches in the following order each time
the DSP SIMULATION button is pressed:
WIDE SCREEN SUPER STADIUM
VIRTUAL MATRIX
2 Press the surround patameter button.
Display the surround parameter screen.
The screen for the selected surround mode appears.
(Remote control unit)
* S u r r P a r a m e t e r
R O O M : M e d i u m
3 Set the parameters.
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
(Remote control unit)
4
(Remote control unit)
NOTES:
• The surround speaker setting can also be changed with the SPEAKER button on the remote control unit.
• When "Default" is selected and the
SIZE" is set to "medium", "EFFECT LEVEL" to "10", "DELAY TIME" to "30ms" and "LFE" to "0dB".
• The "ROOM SIZE" expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual
size of the listening room.
• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC II, DOLBY PRO LOGIC IIx, DTS NEO:6 modes and the input
signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches
to a DTS signal, the mode automatically switches to DTS surround.
(Remote control unit) (Main unit)
ROCK ARENA
VIDEO GAME MONO MOVIE CLASSIC CONCERT
(Main unit)
CH SEL
ENTER
(Main unit)
CH SEL
ENTER
(Main unit)
If the setting mode ends, press the
surround parameter button again.
(Main unit)
0 courser button is pressed, "CINEMA EQ." and "D.COMP." are automatically turned off, "ROOM
JAZZ CLUB
1
1
3
1 2, 4
2,4
3
81